KST-10-P13* CLAMP CYLINDER tube D10 – perpendicular
Description
Clamp cylinder on extrusion P13 for tube D10
(prism perpendicular to tightening axis D10)
Advantages:
V1 – round elements (Gripperarms, Sprue grippers, Gripper fingers) will be connected very easy
V2 – Tube connection with screw and 4 edge nut
Remark:
Material Aluminium
Table:
X = suitable for Profile …
| Desc. | Article nr. | A | B | X | Weight | PU |
| KST-10-P13 | 1-30-50-10-00-KST | 10 | P13 | SPP | 16g | 1 |
| KST-14-P13 | 1-30-50-12-00-KST | 14 | P13 | SPP | 18g | 1 |
| KST-14-P22 | 1-30-50-20-00-KST | 14 | P22 | MPP | 45g | 1 |
| KST-20-P22 | 1-30-50-30-00-KST | 20 | P22 | MPP | 49g | 1 |
| KST-30-P22 | 1-30-50-40-00-KST | 30 | P22 | MPP | 111g | 1 |
Reference
0000062878
Weight
16g
Products you may also be interested in
-
APP-P13* ADAPTER PLATE with groove for extrusions
-
FN8A * FIXED NOZZLE T 8 M 10 Adj 15 mm
-
FN8B * FIXED NOZZLE T 8 M 10 Adj 30 mm
-
GGP-0-P13-0-1* BASE PLATE for extrusion P13 and quick tool change GWS-0
-
GGP-01-P13-0-1* BASE PLATE for extrusion P13 and for quick tool change GWS-01
-
GGP-0-P13-0-2* BASE PLATE for extrusion P13 and for quick tool change GWS-0
-
GGP-0-P22-0-1* BASE PLATE for extrusion P22 and for quick tool change GWS-0
-
GGP-1-P13-0-3* BASE PLATE for extrusion P13 and for quick tool change GWS-1
-
GGP-1-P13-90-3* BASE PLATE for extrusion P13 and for quick tool change GWS-1
-
GGP-R-10-P13* QUICK TOOL CHANGE Tool
-
KSV-K-P13-10-30-V* CLAMP with ball joint
-
KSV-K-P13-10-60-V* CLAMP with ball joint
-
KSV-K-P13-10-90-V* CLAMP with ball joint
-
KSV-K-P13-14-30-V* CLAMP with ball joint
-
KSV-K-P13-14-60-V* CLAMP with ball joint
-
KSV-K-P13-14-90-V* CLAMP with ball joint
-
MFI-A59* ELBOW with tightening element, d10 mm, average, with screws
-
SN8 * SPRING-LOADED NOZZLE T 12 M 12 C= 8
-
SPP-18-10-P13-2000* EXTRUSION P13 18×10 L2000mm
-
SPP-18-18-P13-2000* EXTRUSION P13 18×18 L2000mm
-
SPP-18-18-P13-N-2000* EXTRUSION P13 18×18 L2000mm
-
VSRT1025* Rotative SUSPENSION with threaded body M10x1, 25 mm stroke, M5, with 2 nuts
-
VSNT1010* Non-rotative SUSPENSIONS with threaded body
-
VSNT1025* Non-rotative SUSPENSION with threaded body M10x1, 25 mm stroke, M5, with 2 nuts
-
VSNT1010* Non-rotative SUSPENSION with threaded body M10x1, 10 mm stroke, M5, with 2 nuts
-
GGD-LS-14-18-5-40* Spring-loaded NOZZLE with fixed end cap
-
GGV-G-10-5-5-10* Spring-loaded NOZZLE with swivelling end cap (not rotating)
-
GZA-10-8-P13* GRIPPER with 2 angular jaws for prism
-
GZA-14-16-P13* GRIPPER with 2 angular jaws for prism
-
GZA-14-16-C-S* GRIPPER with 2 angular jaws for prism, with sensor
-
PB-0140* Pneum angle GRIPPER, non self-centering
