KKR-10-P13* FIXING CLAMP tube D10 90°
Description
Fixing clamp tube D10 on extrusion P13 for 90° assembly
Advantages:
V1 – round elements such as Gripper arms, grippers and gripper fingers can be mounted on the PreciGrip Profile
V2 – Centring to pin the gripper arm
Remark:
Material Aluminum
| Desc. | Article nr. | A | B | Weight | PU |
| KKR-10-P13 | 1-30-53-10-00-KKR | 10 | P13 | 55g | 1 |
| KKR-14-P13 | 1-30-53-14-00-KKR | 14 | P13 | 21g | 1 |
| KKR-14-P22 | 1-30-53-16-00-KKR | 14 | P22 | 27g | 1 |
| KKR-20-P22 | 1-30-53-18-00-KKR | 20 | P22 | 34g | 1 |
| KKR-30-P22 | 1-30-53-22-00-KKR | 30 | P22 | 79g | 1 |
Reference
0000062907
Weight
55g
Products you may also be interested in
-
KVS-P13-P13* CONNECTION PRISM for extrusions 90°
-
KVS-P13-P22* CONNECTION PRISM for extrusions 90°
-
WIV-2-2-P13-P13* ANGLE BRACKET for extrusions 90°
-
WIV-2-2-P13-P22* ANGLE BRACKET for extrusions 90°
-
PPV-P13-P13-2* CONNECTION PRISM for parallel extrusions
-
PPV-P13-P22-2* CONNECTION PRISM for parallel extrusions
-
PDV-P13-P13-360* Turn-connection PRISM for extrusions
-
PDV-P13-P22-360* Turn-connection PRISM for extrusions
-
PDV-P13-S-360-E* Turn-connection PRISM for extrusions
-
PGE-P13-P13* SEAL for extrusion P13-P13
-
KVP-PI-13-XL* Linking BRACKET 2 extrusions 90°
-
KVP-A-P13-P13* Linking BRACKET 2 extrusions 90°
-
KVP-A-P22-P13* Linking BRACKET 2 extrusions 90°
-
FN8A * FIXED NOZZLE T 8 M 10 Adj 15 mm
-
FN8B * FIXED NOZZLE T 8 M 10 Adj 30 mm
-
SN8 * SPRING-LOADED NOZZLE T 12 M 12 C= 8
-
MFI-A59* ELBOW with tightening element, d10 mm, average, with screws
-
MFI-A315* CLAMP for fixing SGP-32S gripper, with screws
-
MFI-A316* CLAMP for fixing SGP-25S gripper, with screws
-
MFI-A317* CLAMP for fixing SGP-20S gripper, with screws
-
VSRT1025* Rotative SUSPENSION with threaded body M10x1, 25 mm stroke, M5, with 2 nuts
-
VSN1010* Non-rotative SUSPENSION with smooth body, d10 mm, 10 mm stroke, M5
-
VSN1025* Non-rotative SUSPENSION with smooth body, d10 mm, 25 mm stroke, M5
-
VSNT1010* Non-rotative SUSPENSION with threaded body M10x1, 10 mm stroke, M5, with 2 nuts
-
VSNT1010* Non-rotative SUSPENSIONS with threaded body
-
VSNT1025* Non-rotative SUSPENSION with threaded body M10x1, 25 mm stroke, M5, with 2 nuts
-
MFI-A155* EXTENSION with air duct, d10 mm, long, M5
-
GGD-LS-14-18-5-40* Spring-loaded NOZZLE with fixed end cap
-
GGV-G-10-5-5-10* Spring-loaded NOZZLE with swivelling end cap (not rotating)
-
GZA-10-8-P13* GRIPPER with 2 angular jaws for prism
-
PB-0140* Pneum angle GRIPPER, non self-centering
