GWS-R-10-K* QUICK TOOL CHANGE Master

Description

Circular manual quick tool change, diameter 90, payload 40 kg,
max. axial torque 100 Nm, max. radial torque 50Nm,
8 pneumatic connections G 1/4

Advantages:

V1 – The EOAT Quick Change System can be used for all types of robots
V2 – Repeatability + / – 0.025 mm
V3 – thumb pressure is sufficient to switch unit (Bayonet)
V4 – Pneumatic is directly connected
V5 – locking pin to lock the closed position
V6 – Compatible with Wemo / Gimatic / SAS Systems
V7 – BACKLASH REDUCTION by integrated pressure screw
V8 – air- or vacuum connections are inside thread: as needed change only the air connectors
V9 – pressure screw fixed by setscrew

Remark:

Electrical connectors on request
advanced data sheet on request

OTHER SIZES ON REQUEST

Table

load values are statically determined:
D = maximal traction
E = maximal torque
F = max. bending moment
holding force 10N = 1kg
N = number of air or vacuum connections
O = diameter tube / thread (not tapered)
X = Suitable for gripper base plate round GGP-R

Desc.

Article nr.